Skip to product information
1 of 3

Marker

Marker Phoenix 2 Mips Helmet 2027

Marker Phoenix 2 Mips Helmet 2027

Based on the award-winning Phoenix MAP, the Phoenix 2 MIPS is an extensive upgrade. With extra direct impact protection in the form of MARKER‘s adaptive polymer (MAP) plus rotational impact protection from MIPS, this helmet goes the extra mile to deliver optimised protection on any slope. The 360° RTS FIT SYSTEM keeps the head centered in the helmet, providing optimal fit for maximum protection. Goggle fogging and overheating won‘t be an issue with MarkAIR channel ventilation, which ensures goggle ventilation for ultimate climate control and anti-fogging (can be regulated with a two-position climate control system). Cold day and thick gloves? No problem with the FIDLOCK OG SNAP buckle, a staple of MARKER helmets since its inception. No need to take off gloves to adjust or remove the helmet. The goggle clip does not obstruct or create any bulk, no matter what goggles you’re wearing. 360° helmet edge protection gives you a high-end look, while protecting the inside of the helmet against ageing. Finally, this helmet comes with two interchangeable and washable liners – a highly sweat-absorbent Xdry liner as well as its cosier, softer fleece variant. Very simple to switch, perfect for all conditions.

Age: Adult
Category: All Mountain
Certification: CE-EN-1077-2007-Class-B
Construction - Helmets: MAP Protection, Mips Protection, Hybrid - ABS Top Shell + In-Mold PC Side Shell, EPS Edge Protection
Features: MAP, Mips
Gender: Men's, Women's
Helmet - Earpads: Multi-Configuration, Removable, SoGnar
Helmet - Fit System: RTS 360° Fit
Helmet - X-Dry Lining: X-Dry Fleece, X-Dry Standard
Ventilation - Goggle: 2-position Climate Control

2 POSITION CLIMATE CONTROL

The ventilation within the helmet can be controlled using the adjustable 2 POSITION CLIMATE CONTROL (partially or fully closed). This works even with gloves on and while in motion! Move the slider to control the air volumes to match your own personal warmth preferences. Naturally the MarkAir CHANNEL SYSTEM will assist keeping your head warm and dry even if the controls are fully shut. When fully opened, the special vent design prevents the head from growing chilled.


XDRY PERFORMANCE LINING

Technical performance lining that ensures optimal thermal efficiency. The textured material insulates against cold and, in the event of excess heat, the air is transported to the exterior. Beyond this, moisture is wicked outwards to prevent excessive sweating. Features: quickly removable and hand-washable in lukewarm water.


HYBRID SHELL CONSTRUCTION

The best of both worlds: the HYBRID SHELL CONSTRUCTION combines the weight and comfort advantages of IN-MOLD technology with the robustness of the hard shell construction. In the event of a crash, the hard shell is not just highly durable, but also distributes the pressure across its surface. The extra-light IN-MOLD shell for the lower head wraps around the entire rear of the head to provide optimal protection. The final product is a premium helmet featuring state-of-the-art technology, a low total weight, outstanding comfort and an ABS outer shell for maximum durability, top ventilation and a fine look that will remain attractive even after hard use.


RTS 360° FIT SYSTEM

Thanks to 360° RTS FIT SYSTEM, the helmet is adapted and centered to the head shape all around, which ensures an optimal fit, pleasant wearing comfort and snug fit without slipping.


Mips PROTECTION

MIPS stands for Multi-directional Impact Protection System, which is a leading slip-plane technology inside the helmet designed to reduce rotational forces that can result from certain impacts. MIPS has been developed by leading brain surgeons and scientists to reduce the rotational forces on the brain caused by angled impacts to the head.

MAP PROTECTION

Clinical studies have shown that the rear of the head, the forehead and the temple areas have the highest injury risk levels. MARKER MAP technology provides increased protection to these particular at-risk areas. MAP helps absorb impacts much more effectively than other materials and even shields against multiple blows in an extremely brief period.

FIDLOCK OG SNAP

helmets tech fidlock og snap
The revolution for helmet closures – extremely convenient to operate. The FIDLOCK OG SNAP is the first magnetic safety closure with a slider mechanism that can be opened and closed with one hand. This helps ensure an extremely secure hold in the event of a crash, yet can be operated very quickly even while wearing a ski glove and is designed to guard against pinching your skin.

EXTRA FLEECE LINER

Additional extra soft fleece lining for more warmth and cozy comfort. Can be conveniently replaced with the normal lining and is, of course, washable.


EDGE PROTECTION

helmets tech edge protection
All MARKER IN-MOLD and HYBRID SHELL helmets have an additional polycarbonate plate on their lower edge for extra protection in the event of a side impact. This also protects the helmet against dings and dents during transport or daily usage. The various models come with 180°, 270° or 360° EDGE PROTECTION.


MarkAIR CHANNEL Ventilation System

The complex MarkAIR Channel Ventilation System, used in all MARKER helmets, is one of the most advanced temperature regulation system available. It consists of a precisely calculated network of vent openings and air channels to combine the ventilation of the outer shell with interior channels of the EPS foam core. This allows the MarkAIR CHANNEL SYSTEM to literally pull the warm, moist air out of the goggles, “sucking” it along the air channels and out of the helmet to reduce any fogging of the goggles. At the same time there is a constant and pleasant flow of air to cool the entire system and regulate it automatically. This ensures a cool head whatever the situation, without need for manual adjustments.


BEANIE READY

helmets tech beanie ready
Like skiing with a beanie under your helmet – or sometimes with, sometimes without? BEANIE READY means that you can remove the lining from your helmet quickly and easily, and replace the lining with your beanie. The helmet has no annoying Velcro enclosures that could damage your hat!
All product descriptions, information, and data are provided by manufacturers and suppliers. The pictures and size information are for reference only, subject to the actual product received.
View full details